Designed especially for connecting plasterboard dry lining systems to masonry walls, concrete soffit and timber joists.

Designed especially for connecting plasterboard dry lining systems to masonry walls, concrete soffit and timber joists.

Bolt down fence post shoes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money.

Designed to be fixed down onto an existing concrete base or wall and are perfect for patio fencing, decking, pergolas or car ports. The bolt secure version features 2 x 8mm carriage bolts that tighten and clamp the post firmly into the post holder section to prevent any post movement as well as allowing for over/under sized post tolerance.

The bolt system also allows for removal of the post at a later stage if required. This system prevents against post rot and decay as it will hold the base of the post above ground level.

Available in a red oxide powder coat to blend in with fencing whilst also providing a medium rust protection. Use hot dip galvanised for maximum rust protection.

Both options can be over painted if you wish.

Bolts post secure for a solid permanent fit. Bolts to concrete or wooden base.

Perfect for strengthening 90 degree joints. Zinc plated steel.

A simple solution to tie window boards to masonry.

Strengthening inside corners. Countersunk holes for a flush finish. Zinc plated steel.

Timco's Welded Masonry Joist Hangers offer a durable and secure solution for a variety of masonry applications. Constructed from stainless steel grade A2, these 47 x 165 joist hangers provide the strong and reliable support needed for a successful fit. With a pack of 6, these joist hangers are an ideal choice for both professional and DIY projects.

The TIMco Masonry Hanger range has been designed to support timber joists from a brick or block wall. Install by either building into the wall or for renovation work, rake out existing brickwork. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak.

• Conforms to Eurocode 6 and service class 3
• Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timber

Hangers above 150mm are manufactured 10mm less to allow for notching and regularised timber. For ultimate corrosion resistance use stainless steel.

Generally used for vertical restraint. Manufactured from galvanised steel.