Collection: Speedfit Fittings
-
- Regular price
- £0.38
- Sale price
- £0.38
- Regular price
-
£0.53
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 15mm Release Aid | 15RA | 70011932
-
- Regular price
- £7.99
- Sale price
- £7.99
- Regular price
-
£9.33
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 15mm x 1/2" Male Stem Adaptor | MW051504N | 70011674
-
- Regular price
- £4.99
- Sale price
- £4.99
- Regular price
-
£6.92
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 15mm x 10mm Reducing Elbow | PEM215101W | 70011080
-
- Regular price
- £0.18
- Sale price
- £0.18
- Regular price
-
£0.23
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 22mm Collet Locking Clip - Grey | CM1822W | 70011913
-
- Regular price
- £0.38
- Sale price
- £0.38
- Regular price
-
£0.52
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 10mm SuperSeal Pipe Insert | STS10 | 70011849
-
- Regular price
- £14.99
- Sale price
- £14.99
- Regular price
-
£19.59
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 15mm Double Check Valve with Service Valve | 15DCSV | 70011792
-
- Regular price
- £9.99
- Sale price
- £9.99
- Regular price
-
£12.90
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 15mm Plastic Ball Valve | 15SV-H | 70011821
-
- Regular price
- £7.99
- Sale price
- £7.99
- Regular price
-
£9.45
JG Speedfit fittings have been designed for use with both plastic and copper pipe, in diameters of 10mm to 28mm, and are approved by the Water Research Centre within the requirements of the UK Water Fittings Byelaws Scheme.
The twist and lock Speedfit fittings have a collet with stainless steel teeth and an o-ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the o-ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement, approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291 Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oil or compressed air applications
- JG Speedfit 15mm x 1/2" BSPT Brass Male Coupler | MW011504N | 70011626
-
- Regular price
- £4.99
- Sale price
- £4.99
- Regular price
-
£7.16
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 22mm x 15mm x 15mm Reducing Tee | PEM3022BW | 70011174
-
- Regular price
- £5.99
- Sale price
- £5.99
- Regular price
-
£7.62
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit SPEEDPEX 15mm x 3m Straight Length | 15BPEX-20x3L | 70010165
- Page 2 of 15
- Next page