Drive in post spikes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money.

They feature a 4 fin steel spike to ensure a solid, permanent, wind resistant fit. The bolt secure version features 2 x 8mm carriage bolts that tighten and clamp the post firmly into the post holder section to prevent any post movement as well as allowing for over/under sized post tolerance.

The bolt secure system also allows for removal of the post at a later stage if required. The system prevents against post rot and decay as it will hold the base of the post above ground level.

Available in a red oxide powder coat to blend in with the fencing and provides medium rust protection or hot dip galvanised for maximum rust protection.

Both options can be over painted if you wish. For 4ft fencing use a 600mm spike, for 6ft fencing use a 750mm spike.

Gate hooks to build are used for embedding in between layers of the post brickwork and can be used with straight and cranked hook and band hinges. No fixings needed.

Post extenders are ideal for raising the height of fence posts by up to one metre. The quick fit version features inverted fins inside the post holder section that will hold each post in a vice like grip. They are available in a red oxide powder coat to blend in with the fencing and provides a medium rust protection which can also be over painted if you wish to match with a different fence colour.

Flush fit bolt down fence post shoes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money.

They are designed to be fixed down onto an existing concrete base or wall and are perfect for patio fencing, decking, pergolas or car ports where the post needs to be fitted flush against a wall.

The bolt secure version features 2 x 8mm carriage bolts that tighten and clamp the post firmly into the post holder section to prevent any post movement as well as allowing for over / under sized post tolerance.

The bolt system also allows for removal of the post at a later stage if required. The system prevents against post rot and decay as it will hold the base of the post above ground level.

Available in a red oxide powder coat to blend in with fencing whilst also providing a medium rust protection. Use hot dip galvanised for maximum rust protection. Both options can be over painted if you wish.

A useful threaded hook bolt for attaching ropes or cables. Manufactured using a forging process, to prevent opening out the hook when load is applied. Sold without shield.

Used for securing insulation to wood.

Specifically designed to attach composite panel to light section steel. Self-drilling point with hexagon head.

Designed to anchor insulation material to concrete and masonry substrate materials.

A rapid and effective light duty anchoring system for fixing into concrete, brick, stone, concrete block and wood. This through fixing provides a single solution and replaces traditional fixings such as nylon frame and hammer fixings.

• Designed to replace traditional masonry fixings
• TX30 TX Drive recess to reduce driver wear & prevent camming out
• Serrated V-threads to achieve optimum insertion into all masonry types
• Zinc plated and yellow passivated for increased corrosion resistance
• High Low threads for ease of insertion

Metal insulation fixings disc with a large diameter head - this item is the disc only. Metal insulation fixing designed to anchor insulation material to concrete and masonry substrate materials. Suitable for use in concrete, block, brick and stone.

• Designed to anchor insulation material to concrete and masonry substrate materials
• Large diameter head
• 35mm