Expertly heat your home with the Viessmann Vitodens 100-W Compact Boiler. With central heating capabilities, this powerful boiler efficiently warms your space. Keep your home warm and comfortable with this top-of-the-line home heating solution.

VITODENS 100-W HEAT ONLY
A compact and efficient heat only gas boiler
A heat only, wall mounted gas fired condensing boiler which is compact enough to fit in a standard kitchen cupboard. Also suitable for use in other applications where there is only limited space available.

Rated outputs: 11 kW, 16 kW, 19 kW, 25 kW and 32 kW
Attractive price/performance ratio
Simple and intuitive operation
H₂ 20% Blend

• 0.5m Length Part Number: 7373223
• 1m Length Part Number: 7373224
• 1.95m Length Part Number: 7373225

Suitable for Viessmann Vitodens boiler systems, this flue extension pipe allows for a greater level of flexibility when siting a boiler. The extension allows the flue system to exit further away from problematic areas and is perfect for when the boiler is installed in unusual locations, such as a kitchen cupboard, garage or basement.

• Diameter 60/100mm
• Part of the Viessmann Vitodens range

• Part Number: 7373226

Suitable for Viessmann Vitodens boiler systems, this 87-degree flue elbow allows for a greater level of flexibility when siting a boiler, allowing the flue system to be moved as far away from neighbouring buildings as possible. The bend is perfect when the boiler is installed in unusual locations, such as a kitchen cupboard, garage or basement.

• 87 Degree Flue Elbow
• Diameter 60/100mm
• Part of the Viessmann Vitodens range

The Viessmann Vitodens 050-W Combi Boiler is a reliable home heating solution that efficiently provides central heating. With a high-performing boiler, it offers optimal comfort and energy savings. Upgrade your home heating system with this 35kW combi boiler.

Part numbers:

• 29kW = BPJD030
• 35kW = BPJD031

With the Vitodens 050-W, Viessmann now offers an attractively priced wall mounted gas condensing boiler with proven quality. An extensive range of accessories makes the Vitodens 050-W equally suitable for either new build or modernisation. It is offered with two DHW output ratings (5.9 to 29 and 8 to 35 kW), as a combi boiler with an integral instantaneous water heater. An electronic boiler control unit for thermostatic mode and weather compensated mode is already integrated into the Vitodens 050-W, along with a frost stat. The outside temperature sensor is available as an accessory.

The Vitodens 050-W features a particularly low level of operating noise and its components are accessible from the front for ease of service and maintenance. With a height of only 707 mm, the Vitodens 050-W is one of the smallest walls mounted boilers in its class. Its compact dimensions recommend it as a replacement for outdated boilers in multi-storey buildings, including up to five boilers on different floors connected to one vertical flue system.

Inox-Radial heat exchanger and cylinder burner made from stainless steel
The high-quality stainless steel Inox-Radial heat exchanger efficiently converts the supplied energy into heat. Its efficiency (to DIN) is 97 percent (Hs) [gross cv] or according to SEDBUK > 89.1 % (2009). The stainless steel cylinder burner, therefore, consumes relatively little natural gas, with lower CO2 emissions and less impact on the environment as a result.

Specifications

• Attractively priced wall mounted gas condensing boiler
• Economical and efficient, with high standard seasonal efficiency [to DIN] up to 97 % (Hs) [gross cv] / 108 % (Hi) [net cv] or SEDBUK > 89.1 % (2009)
• Energy efficiency rating: A
• High-efficiency A rated modulating pump
• Modulation range up to 1:4
• Extensive system accessories
• Inox-Radial heat exchanger and cylinder burner made from stainless steel
• Easy operation, optionally also via room thermostats
• Plug in time clock and wireless receiver options
• Weather compensation option available
• Ideal for installation in living areas due to low operating noise and compact dimensions
• Compact installed height, with recessed fittings not requiring pipe cover
• Improved access to serviceable parts e.g. plate heat exchanger
• Ease of wiring

- Manufacturers Brochure PDF File

- Weather Compensation PDF File

- Manufacturer Warranty Terms & Condition

Upgrade your home heating system with the Viessmann Vitodens 050-W Combi Boiler. With a powerful 29kW output, it provides both central heating and hot water. This efficient boiler is a reliable and cost-effective solution for heating your home. Trust the industry expert for a comfortable and warm home.

Part numbers:

• 29kW = BPJD030
• 35kW = BPJD031

With the Vitodens 050-W, Viessmann now offers an attractively priced wall mounted gas condensing boiler with proven quality. An extensive range of accessories makes the Vitodens 050-W equally suitable for either new build or modernisation. It is offered with two DHW output ratings (5.9 to 29 and 8 to 35 kW), as a combi boiler with an integral instantaneous water heater. An electronic boiler control unit for thermostatic mode and weather compensated mode is already integrated into the Vitodens 050-W, along with a frost stat. The outside temperature sensor is available as an accessory.

The Vitodens 050-W features a particularly low level of operating noise and its components are accessible from the front for ease of service and maintenance. With a height of only 707 mm, the Vitodens 050-W is one of the smallest walls mounted boilers in its class. Its compact dimensions recommend it as a replacement for outdated boilers in multi-storey buildings, including up to five boilers on different floors connected to one vertical flue system.

Inox-Radial heat exchanger and cylinder burner made from stainless steel
The high-quality stainless steel Inox-Radial heat exchanger efficiently converts the supplied energy into heat. Its efficiency (to DIN) is 97 percent (Hs) [gross cv] or according to SEDBUK > 89.1 % (2009). The stainless steel cylinder burner, therefore, consumes relatively little natural gas, with lower CO2 emissions and less impact on the environment as a result.

Specifications

• Attractively priced wall mounted gas condensing boiler
• Economical and efficient, with high standard seasonal efficiency [to DIN] up to 97 % (Hs) [gross cv] / 108 % (Hi) [net cv] or SEDBUK > 89.1 % (2009)
• Energy efficiency rating: A
• High-efficiency A rated modulating pump
• Modulation range up to 1:4
• Extensive system accessories
• Inox-Radial heat exchanger and cylinder burner made from stainless steel
• Easy operation, optionally also via room thermostats
• Plug in time clock and wireless receiver options
• Weather compensation option available
• Ideal for installation in living areas due to low operating noise and compact dimensions
• Compact installed height, with recessed fittings not requiring pipe cover
• Improved access to serviceable parts e.g. plate heat exchanger
• Ease of wiring

- Manufacturers Brochure‚ PDF File

- Weather Compensation PDF File

- Manufacturer Warranty Terms & Conditions

Experience efficient and reliable home heating with the Viessmann Vitodens 100-W Compact Boiler. With its 13kW capacity and central heating capabilities, this heat only boiler will keep your home warm and comfortable. Trust in its advanced technology and expert engineering for consistent, high-quality performance.

Part numbers:

• 13kW = WB1B316
• 16kW = WB1B317
• 19kW = WB1B318
• 26kW = WB1B319
• 35kW = WB1B491

With a depth of only 285 mm (340 mm on the 35 kW model), the compact Vitodens 100-W Open vent boiler is perfectly suited for integration into standard kitchen cupboards. It can also be used in a vast number of other applications where there is only limited space available.

The corrosion-resistant stainless steel Inox-Radial heat exchanger with unrivalled wall thickness is extremely durable and achieves efficiency levels of up to 97%. The boiler's special design ensures the very low operating noise of 39 dB(A) maximum (26 kW), which is perfectly acceptable even in the kitchen.

The Vitodens 100-W Open vent can even operate in weather compensated mode without incurring a costly heating system modification, all that is needed is a simple upgrade.
Weather compensation acts like an auto-pilot as it detects outside temperature changes and automatically adjusts the flow temperature of the boiler, achieving gas savings of up to 12% in the process.

Whilst being specifically designed for open vent heating systems, the Vitodens 100-W Open vent is suitable for sealed systems using an additional expansion vessel safety valve.

The boiler also shares the various flue options available for the Combination and System models of the Vitodens 100-W gas condensing boiler range.

Decision-making aid in buying a new heating system. The ErP directive is a new, energy efficiency identification, standardised throughout Europe; making energy consumption more transparent.

• Rated outputs: 13 kW, 16 kW, 19 kW, 26 kW and 35 kW
• Exceeds SEDBUK minimum efficiency requirements
• Compact dimensions to fit in standard kitchen cupboards
• Standard efficiency up to 97% through stainless steel Inox-Radial heat exchanger
• Weather compensation option
• LPG conversion available
• Large user display
• Energy efficiency class: A

• 0.5m Length Part Number: 7373223
• 1m Length Part Number: 7373224
• 1.95m Length Part Number: 7373225

Suitable for Viessmann Vitodens boiler systems, this flue extension pipe allows for a greater level of flexibility when siting a boiler. The extension allows the flue system to exit further away from problematic areas and is perfect for when the boiler is installed in unusual locations, such as a kitchen cupboard, garage or basement.

• Diameter 60/100mm
• Part of the Viessmann Vitodens range

• 0.5m Length Part Number: 7373223
• 1m Length Part Number: 7373224
• 1.95m Length Part Number: 7373225

Suitable for Viessmann Vitodens boiler systems, this flue extension pipe allows for a greater level of flexibility when siting a boiler. The extension allows the flue system to exit further away from problematic areas and is perfect for when the boiler is installed in unusual locations, such as a kitchen cupboard, garage or basement.

• Diameter 60/100mm
• Part of the Viessmann Vitodens range

• Part Number: 7373227

Suitable for Viessmann Vitodens boiler systems, this 45-degree flue elbow allows for a greater level of flexibility when siting a boiler, allowing the flue system to be moved as far away from neighbouring buildings as possible. The bend is perfect when the boiler is installed in unusual locations, such as a kitchen cupboard, garage or basement.

• 45 Degree Flue Elbow
• Diameter 60/100mm
• Part of the Viessmann Vitodens range