Collection: Speedfit Fittings
-
-
+sp.priceRaw
? 'price price--on-sale'
: 'price'
"
>
- Regular price
- £1.99
- Sale price
- £1.99
- Regular price
-
£2.91
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 15mm x 1/2" Hose Connector | NC448 | 70011425
-
-
+sp.priceRaw
? 'price price--on-sale'
: 'price'
"
>
- Regular price
- £4.99
- Sale price
- £4.99
- Regular price
-
£7.02
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 15mm 2 Way Divider | CM2315W | 70011989
-
-
+sp.priceRaw
? 'price price--on-sale'
: 'price'
"
>
- Regular price
- £2.49
- Sale price
- £2.49
- Regular price
-
£3.75
JG Speedfit fittings have been designed for use with both plastic and copper pipe, in diameters of 10mm to 28mm, and are approved by the Water Research Centre within the requirements of the UK Water Fittings Byelaws Scheme.
Effortlessly convert your plumbing connections with the JG Speedfit Imperial Conversion Converter. This high-quality converter allows you to easily switch between 15mm and 5/8" sizes, providing a seamless and secure fit. With its durable construction and user-friendly design, you can trust in its reliable performance for your plumbing needs.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 15mm x 5/8" IMP Conversion Converter | NC471 | 70011409
-
-
+sp.priceRaw
? 'price price--on-sale'
: 'price'
"
>
- Regular price
- £0.38
- Sale price
- £0.38
- Regular price
-
£0.52
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 15mm SuperSeal Pipe Insert | STS15 | 70011852
-
-
+sp.priceRaw
? 'price price--on-sale'
: 'price'
"
>
- Regular price
- £13.99
- Sale price
- £13.99
- Regular price
-
£0.00
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 22mm Plastic Ball Valve | 22SV-H | 70011822
-
-
+sp.priceRaw
? 'price price--on-sale'
: 'price'
"
>
- Regular price
- £2.99
- Sale price
- £2.99
- Regular price
-
£4.28
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 15mm Equal Tee | PEM0215W | 70011115
-
-
+sp.priceRaw
? 'price price--on-sale'
: 'price'
"
>
- Regular price
- £4.99
- Sale price
- £4.99
- Regular price
-
£6.92
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 22mm x 15mm Reducing Elbow | PEM212215W | 70011083
-
-
+sp.priceRaw
? 'price price--on-sale'
: 'price'
"
>
- Regular price
- £0.17
- Sale price
- £0.17
- Regular price
-
£0.20
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 15mm Collet Locking Clip - White | CM1815W | 70011912
-
-
+sp.priceRaw
? 'price price--on-sale'
: 'price'
"
>
- Regular price
- £6.99
- Sale price
- £6.99
- Regular price
-
£9.45
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 15mm x 1/2" BSP Brass Male Coupler | 15MC | 70011644
-
-
+sp.priceRaw
? 'price price--on-sale'
: 'price'
"
>
- Regular price
- £2.19
- Sale price
- £2.19
- Regular price
-
£2.97
JG Speedfit fittings have been designed for use with both plastic andcopper pipe, in diameters of 10mm to 28mm, and are approved by theWater Research Centre within the requirements of the UK Water FittingsByelaws Scheme.
The twist and lock speedfit fittings have a collet with stainless steel teeth andan ‘O’ ring to provide a permanent leak-proof seal. A simple twist of a screwcap locks the pipe into position and increases the compression on the ‘O’ring seal to give added security.
JG Speedfit products are fully certified by the British Board of Agreement,approved by the Water Regulations Advisory Scheme, and are kitemarked toBS7291, Parts 1 and 3.
- Mains fed and indirect cold water systems
- Vented and unvented hot water systems
- Vented central heating systems
- Sealed central heating systems provided temperatures and pressures
comply with BS7291 Parts 1 and 3 Class S- JG Speedfit should not be used for gas, fuel oilor compressed air applications
- JG Speedfit 15mm Equal Elbow | PEM0315W | 70011071
- Page 1 of 15
- Next page